So it may seem like there have
been far too many mentions of the costumes that will be making the trip with
the GIR and I out to Gen Con, but very little beyond that. There are a couple
reasons for that, one of which we’ve discussed a handful of times. The large
size and multiple intended wearers of the Gen Con cosplay cache prompted me to
tackle construction of the outfits a little differently than if I were making
just one costume for a single wearer. This time around I’ve been plugging away
on each costume at intervals so each of the three remain around the same level
of completion and we’re at the point where all three are nearly done. Given all
that, we can finally start talking about the last two costumes and how they
came together.
The GIR and I have a
long-standing and deeply-rooted affection for The Venture Bros. It’s watched, re-watched, and quoted on an
extremely frequent basis in our house. We’re those crazy people who have
convinced ourselves that the 2+ year breaks between recent seasons aren't frustrating but, rather, are some
sort of test of our devotion. We regularly debate swapping our trip to Gen Con
for a sojourn to Dragon*Con solely because the latter is the only convention
regularly attended by the show’s creators: Jackson Publick and Doc Hammer. That
substitution won’t be happening this year though, so Gen Con will be subjected
to our fanaticisms. We’ll be cosplaying as Dr. Mrs. The Monarch and a Henchman
(he refuses to say it’s 21 and instead claims he’s 28 or another semi-canonical member of the Fluttering Horde). The rest of this post will focus on the GIR’s Henchman costume and
there’ll be a separate entry for the Dr. Mrs. outfit.
 |
| Photo via Adult Swim |
The Henchman is pretty much the
standard issue uniform for minions of the ‘mighty’ Monarch. This uniform
consists of a black unitard-like body covering, a yellow tunic, a yellow
utility belt with a Monarch logo buckle, matching knee-length boots and
elbow-length gloves, a mask, and a set of orange wings affixed to the wearer’s
back. Let’s look at each of these
pieces.
The Body Covering
The henchmen wear something that’s technically somewhere between a catsuit, a unitard, and a zentai. The garment features sleeves, leg coverings, and also a hood that covers the wearer’s hair, but not their face. You can re-create this suit using the techniques described in this post, specifically those on Tim’s excellent site as he creates suits for a male build. I highly recommend that, if you’re going this route, you use a Spandex/Lycra with a 4-way stretch and a medium weight. The fabric needs to be opaque, but it’s a good idea to also use something that can breathe a bit since so much of the wearer’s body will be enveloped in it.
The henchmen wear something that’s technically somewhere between a catsuit, a unitard, and a zentai. The garment features sleeves, leg coverings, and also a hood that covers the wearer’s hair, but not their face. You can re-create this suit using the techniques described in this post, specifically those on Tim’s excellent site as he creates suits for a male build. I highly recommend that, if you’re going this route, you use a Spandex/Lycra with a 4-way stretch and a medium weight. The fabric needs to be opaque, but it’s a good idea to also use something that can breathe a bit since so much of the wearer’s body will be enveloped in it.
If the premise of working with
stretchy fabrics is terrifying or you’re otherwise not inclined to sew the suit
yourself, there are a number of online outlets that offer ready-made suits.
This one is a particularly close approximation and has the added benefit of
hand/foot/head coverings that are detachable from the main suit. The one caveat
I’d toss out there for Milanoo.com or similar online vendors is that you should
place your order with them as soon as you can. It’s not uncommon for an order
to travel for 6-8 weeks before it arrives at your home.
The Tunic
The henchmen wear a yellow sleeveless one piece over their black body covering. I call it a tunic, but really it’s more of a jumper or a romper than anything else. Think of it as a tank top and a pair of shorts combined. If you happen to own those two garments already, they can serve as ready-made templates for your pattern; just trace their outlines onto muslin or any other type of very cheap fabric, cut out your stencil and you have a nearly complete pattern. Alternatively, you can purchase shorts and a t-shirt or tank top and alter them. I recommend this and this from American Apparel, as that brand produces a color (Gold) that’s a near match for the yellow used in the show. If you do decide to purchase items, it’s a very good idea to buy them in person or order them online at the same time. Staggering your purchases increases the chances that you’ll receive items from different dye lots, so you could end up with two pieces in two distinct shades of yellow.
The henchmen wear a yellow sleeveless one piece over their black body covering. I call it a tunic, but really it’s more of a jumper or a romper than anything else. Think of it as a tank top and a pair of shorts combined. If you happen to own those two garments already, they can serve as ready-made templates for your pattern; just trace their outlines onto muslin or any other type of very cheap fabric, cut out your stencil and you have a nearly complete pattern. Alternatively, you can purchase shorts and a t-shirt or tank top and alter them. I recommend this and this from American Apparel, as that brand produces a color (Gold) that’s a near match for the yellow used in the show. If you do decide to purchase items, it’s a very good idea to buy them in person or order them online at the same time. Staggering your purchases increases the chances that you’ll receive items from different dye lots, so you could end up with two pieces in two distinct shades of yellow.
While you could choose to merge the top and bottom together into a single garment, it’s better from a functional standpoint to keep them separate. Seriously, no one wants to wrestle with a one piece when they’re trying to go to the bathroom. The belt will hide the seams between the pieces anyway. Speaking of which…
The Belt/Buckle, Boots/Gloves, Mask & Antennae
All henchmen sport a utility belt that’s a slightly brighter hue of yellow than the tunic; most belts feature at least one pouch in the same yellow (usually worn on the left hip). I bought a cheap leather belt and covered it with this yellow PVC fabric. Once the belt was suitably yellow, I attached the buckle with two phillips-head screws through the leather itself (obviously, the buckle is largely for show). I kept the real, functional buckle on the belt, but positioned it so it opens along the wearer’s spine. This not only presents a clean line when the belt is viewed from the front, but helps provide support for the wings, which will get to in a moment.
 |
| The belt was about 1.5 inches, (3.81cm) so I cut the PVC into a 2 inch (5.08cm) strip to cover it |
 |
| I used hot glue to wrap the PVC onto the belt, but it does show through the fabric, so I'd recommend just using hot glue on the back. |
 |
| Finished. |
Sprouting from the heads of each
henchman is a set of yellow antennae. To re-create these, I twisted two 18”
(45.72cm) pipe cleaners together, then folded the twisted wires in half and
twisted the two new halves together. I repeated that process to end up with a pair
of 9” (22.86cm) wires, which I then wrapped in masking tape. Using hot glue, I
stuck 1/2” (1.27cm) wooden beads to the end of each wire, then added color with some
yellow spray paint on the whole shebang. The finished antennae were then wired onto a large headband, which I then glued into the inside of the hood of the body covering.
The Wings
Wings are one of those challenges
that cosplayers tend to put in a category all their own. It’s no coincidence
that most of us would consider making a set of wings to be a Major. Though I
was initially gung ho to make a set of fully deployable wings for the GIR, I
ended up making simpler, pared down version instead. Since we have to ship them
out to Indy, it makes sense to have the wings be as uncomplicated as possible.
It would have been gut-wrenching to create deployable wings only to have them
be damaged in transit. Fewer parts = lower probability of catastrophic failure (hopefully).
Though they don’t have any extending
mechanisms, and thus didn’t require me to build a custom rig, the wings still
needed to be wearable and self-supporting. The easiest way to create a wearable
foundation is to start with something that’s already been designed to be a
garment and carry weight, then modify it to your needs. I began with a simple
black backpack bought out of a clearance bin at a local TJ Maxx. The backpack
is a sturdy blend of canvas and nylon, so it seemed as though it’d be up to the
task of toting wings. I reinforced the primary straps with additional
strips of nylon webbing (think the fabric version of the plastic straps you see
wrapped around large packages) then layered foam on the underside of the straps
to prevent them from digging into the GIR’s shoulders.
Since the backpack is made
entirely of fabric, some rigidity would need to be added before it could
feasibly support wings. I used a 1” (2.54cm) 3-ring binder as the core of both
this support and the hinging mechanism for the wings themselves. The binder was
essentially gutted for its components. I removed each of the covers, leaving
the metal spine, then arranged the covers atop one another until they were the
exact size of the inside cavity of the backpack. The covers were then
permanently affixed in that configuration with a combination of hot glue and
the absurdly toxic adhesive leftover from the construction of the Transistor.
Once the glue had dried, I slipped the new support board into the backpack,
then had the GIR try it on to test the weight and measure where it fell against his
back. From there, we decided where the wings themselves would need to hinge in
order to look right.
 |
| Believe it or not, this is really most of what you need to make wings |
The wings themselves are just two
sheets of foamboard cut with a utility knife into two pairs of semi-ellipses. I
blended two different acrylic paints to get a shade of orange that appears pretty
close to that used in the show and it then took 3 coats of the paint blend to
get the wings evenly colored. After the paint had dried, I used a leather awl
to punch holes in each pair of wings that aligned with the rings of what used
to be the metal spine of the 3-ring binder. I then cut small circles of
foamstock and used hot glue to affix them around the holes in an effort to
reinforce and protect them. After that, it was just a matter of coaxing the wings onto the metal spine and snapping the latter closed.
Woot! Here's hoping the costume survives being shipped out to Indy!
Post Con Breakdown: Every part of the costume held up extremely well and can easily be used again. The only things I'd change would be to add some reinforcing on the pouch in the GIR's utility belt and some more support to help keep the wings vertical. While they performed admirably, the wings were looking decidedly wilted by the end of the day. Some added foam around the binder rings should prevent that from reoccurring.
 |
| The finished product! |
